Teardown: Various mounts, footpegs and triple tree

By | 29th May 2013

A bit more progress, removing various rubber bushes and mounts from the frame, the footpegs and beginning on the triple tree etc. Ran into some stuck fasteners on the helmet locks and the centre stand. Will have to try heat, having applied penetrating oil.

Panel mounts?

Panel mounts?

Panel mounts?

Panel mounts?

Tank mount

Tank mount

IMG_20130529_173128 IMG_20130529_173135 IMG_20130529_173141 IMG_20130529_173219 IMG_20130529_173227 IMG_20130529_173228 IMG_20130529_173806 IMG_20130529_173952 IMG_20130529_174001

Also made some progress on the steering head, but got stuck on the upper bearing, which doesn’t seem to bear much relation to the images in the Haynes manual.

It makes it sound so easy:

Remove the stem locknut. Using an adjustable spanner wrench, remove the stem adjusting nut while supporting the steering head from the bottom. Lift off the race cover and upper bearing (see illustration).

Hah! Got as far as removing the race cover (I think), then found a rubbery washer thing over the bearings and can’t make them budge at all. There seems to be a separare silvery metal band which doesn’t seem to want to shift at all. I don’t want to break anything, so have taken a break to think (and ask the folks on the forum)

Upper bearing

Upper bearing

Upper Bearing

Upper Bearing

Upper Bearing

Upper Bearing

Race cover, adjusting nut, locknut

Race cover, adjusting nut, locknut

IMG_20130529_224924

The Haynes Manual makes it sound so easy!

The Haynes Manual makes it sound so easy!

One thought on “Teardown: Various mounts, footpegs and triple tree

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.